Things need to know about silkscreen printing on plastic packaging
Notice for SS printing
1.Anchor point (means print location point)is needed on bottom to fix the bottle to print, it is a necessary condition for print ,if have it ,could print multi colors on bottle .
2. but for small bottle is difficult to do this point on bottle bottom,so small bottle just could be 1 silk screen print on bottle
3. When print on small bottle ,need to do a fixture ,so it could print
4. For our existing bottle models ,the smaller bottle which have Anchor point is 30ml .
5. Print area is different for each product ,for each print way ,all request to print on a flat surface ,usually for Cylindrical bottle ,it will leave blank for top and bottom ,5mm is at least for each part.could print in a circle,just need to pay attention to the line on bottle ,usually will leave 1-2mm both side.
6. Print area for special shape bottle ,could check print area by a simple way ,to put a hard cardboard on the bottle surface and see which part have gap ,not touch,which part touched ,the part which touched is the max print area for the product.
7. For SS,in our industry,could do 2 colors ,also ,the 2 color could not complex.
8. Special shape such as our salt bottle,will need to print 2 times.
Sanle plastics is a bottle and label manufacturer, get bottle printed and labeled with your logo, to make your brand known on the market. Except the silkscreen printing, gold stamping, labeling are allowed for bottle decoration. For other requirement, please contact with our expert soon.